Sixteen aircraft to start from
Fighters: a propeller fighter, a jet fighter, a stealth fighter, a delta-wing fighter with canards, a ground attack jet and a space fighter. Airliners and heavies: an airliner, a double-deck jumbo with four engines, a business jet, a four-engine cargo plane, a bomber, a biplane and a seaplane. Helicopters: a light helicopter, an attack helicopter with stub wings and rocket pods, and a transport helicopter with two rotors.
Change every part
Swap the parts: low, mid, high or biplane wings, plain tips, winglets, tip tanks or wingtip missiles, a nose propeller, two or four props on the wings, one or two jets in the tail, two or four jets under the wings or two on the rear fuselage, a classic tail, a T-tail, a V-tail or twin fins, a bubble or framed canopy, an open cockpit or airliner windows, wheels, floats or gear up, and guns, missiles or bombs. Add canards, a drop tank or a radar dish. Seven sliders change the length, the body width, the wingspan, how deep the wing is, how big its tip is, how far it sweeps back and the size of the tail, so one starting shape gives many different planes. Helicopters take two to five rotor blades, an open tail rotor or a fan in the fin, skids or wheels, and guns or rockets. Nine liveries include camouflage, an airline cheat line, a shark mouth, invasion stripes and a checker tail.
Panel lines, wear and lights
The Panel lines slider draws the seams between the skin panels with rows of rivets, which adds detail without adding a single triangle. Wear and dirt fades the paint, chips it, and adds grime, streaks blown towards the tail and soot at the back, from factory fresh to a veteran of many flights. Lights on adds a red and a green lamp on the wingtips, a white one on the tail and a beacon, and lights the cabin windows of an airliner with a glow texture, so the plane reads at night. All of it is painted into the same texture, and it exports with the GLB.
Material maps
Turn on Material maps and the plane gets two more textures made from the same detail. A normal map turns the panel lines into real grooves and the rivets into small bumps that catch the light as the plane turns. A roughness and metal map makes dirt dull and chipped spots shine like bare metal. Both are standard glTF maps, so Godot and Unity pick them up when you import the GLB. They add about a megabyte to the file, so leave them off for small mobile games.
Sprites for 2D games
Every plane is a real 3D model and the sprites are pictures of that model, so they always match. The top-down PNG has a see-through background and faces up for a vertical shooter or right for a side scroller. The side view is ready for a 2D flying game. With Pro the banking sheet holds the plane rolling left and right in seven steps, the frames a shoot-em-up plays when the player steers, and the direction sheet holds it turned in 16 directions.
The 3D model
The GLB uses one unit per metre with Y up, and you choose whether the nose points to -Z for Godot, +Z for Unity or +X. The parts that move are their own nodes with the pivot in the right place: Propeller spins around its local X axis, a helicopter's Rotor_Main spins around its local Y and Rotor_Tail around its local Z, Aileron_L, Aileron_R, Elevator_L and Elevator_R turn around their local Z axis, which lies along the hinge, Rudder turns around its local Y axis, and the wheels spin around local Z. Empty marker nodes show where things happen: Marker_Gun_L and Marker_Gun_R at the muzzles, Marker_Exhaust at the engine nozzle, Marker_Wingtip_L and Marker_Wingtip_R for trails, and Marker_Cockpit for a pilot camera. Missiles and bombs are separate nodes so you can drop them.
Test flight
Press Test flight and the plane you just built stands on a runway sized for it, or on a strip of water if it has floats. Open the throttle, lift off, fly the circuit of rings round and back, and land: touch down too steeply or with a wing low and it counts as a crash. If the plane carries guns, missiles or bombs, shoot the balloons on the way. Planes with the gear up start in the air. The propeller speeds up with the throttle and the ailerons, elevators and rudder move with your input, so you see the separate parts working before you export anything. Each plane flies differently: a biplane is slow and turns tightly, a jet is fast and needs room, an airliner is heavy and a jumbo heavier still. A helicopter starts on a pad instead: hold R to lift off, fly the ring circuit and set it down on the pad again. With Pro the game kit includes the same flight model as a Godot script and a Unity script, tuned for your plane or helicopter.
What this style is good for
These are low-poly aircraft with one painted texture and flat shapes, a few hundred to about two thousand triangles. They suit arcade flying games, shoot-em-ups, strategy games, mobile games and prototypes. They are not detailed scale models, and the shapes are generic, so they do not copy any real aircraft.
Can I use the planes commercially?
Yes, in free and commercial games, and you do not need to credit us. Every plane is built by code from the settings you pick. The one thing you cannot do is resell the planes as an asset pack. Read the licence.